Welcome to the continuation of my DIY series, where I showcase unique restorations and builds from around our Corvette community....
As we forge on with this ambitious build, every installment showcases Carl B.’s broad range of skill sets, especially his...
The build has been progressing smoothly, for the most part, with every episode reminding us how talented Carl is. Before...
Carl’s 1977 Stingray build may be on the road, but it is far from done! Prepare to continue to be...
Carl’s 1977 Stingray build is on the road, but the troubleshooting and work left to get into the 10s is...
As we inch closer to the completion of Carl’s ambitious 1977 Stingray build, the work left to get into the...
As we wrap up the final episodes, can Carl get this beast into the tens, and which transmission will his...
When Carl B. from Middletown, NJ set out to use his vast skill set to build a 10-second turbocharged Stingray,...
Carl B. from Middletown, NJ continues to transform this ole ’77 Stingray into a sleeper 10-second track beast, with a...
Today we are going to take a deep dive into the transmission setup Carl will be using for this 10-second...
A key to a successful build like this is to adapt and make changes when necessary, and today is no...
When is a turbo-charged 5.3 LS engine not enough? When Carl is doing the build! But, before we get to...
Today Carl gets after it with a project-packed itinerary. If you missed any previous episodes for Carl’s 10-second turbo build,...
When the local drag strip decided to halt drag racing, Carl begrudgingly had to shift the “philosophy” of his build....
As with most weeks, Carl is jumping around his shop with a flurry of various projects, including more phenomenal electronics...
When we left off, Carl completely redesigned the DIY 4L80E controller and body module for his 1977 Stingray build, which...
We are getting closer to a complete race car as Scot orchestrates this exciting and complicated build. A wide range...
Scot presses on as we reach the eleventh episode on this epic conversion of his 1975 C3 Greenwood Widebody to...
As we dive into part 12, I hope you are enjoying the ride so far. If you need a review...
After 12 episodes I certainly feel like we are getting closer to watching Scot ripping it up on the track!...
We are inching ever closer to the finished product and Scot will be racing soon! If you need a review...
We are so close to finishing, and the attention to detail from Scot on this build has been amazing (and...
When I started this series showcasing this incredible and ambitious build from Scot Y. of Kalamazoo, Michigan, I had no...
Today’s installment is yet another reminder of the patience and skill required to take on a project like this. Even...
Today we continue on Scot’s journey to turn his ’75 Greenwood Widebody into a Pro Touring race car. After part...
Today we get into some fun stuff with the eye candy, as Scot mocks up the engine and transmission, hoping...
When I first thought about bringing Scot’s build to you I figured it would be a four or five-part series....
Scot hasn’t updated his man hours recently, noting he had around 200 hours before part 4. But based on some...
It’s been awe-inspiring to follow Scot’s work so far, as his attention to detail and patience put some paid professionals...
I feel like we are turning the corner and will start to witness some exponential progress. Overall Scot describes this...